Follow us :

  • Square tubing is commonly used as a railing along staircases. However, it is alsoused in other, less obvious ways as well. From being used for fencing around yards to structures of buildings, as well as entry gates and entrances, a wide variety of applications are solved by steel square tubing.

  • Therefore, if steel pipe carry the fluids with pressure, it is very important that pipeshall have enough strength and enough wall thickness. So wall thickness is specified in Schedules, which means the pipe schedule, abbreviated as SCH. Here ASME is the given standard and definition for the pipe schedule.”

  • Also referred to as Box Steel, Square Steel, Tube Steel or Rectangular Steel tube. Hollow Section can be Square or Rectangular with, as the name indicates, a hollow core and is available in either painted black steel (AS1163/C350LO) or Duragal.

  • Shaped tubes typically are produced by making a round tube and then forming it into a square, rectangular, or other shape. ... For making squares and rectangles, the forming process uses three forming blocks for three process steps.

  • RHS is a hot or cold rolled steel profile with a square or rectangular, hollow cross section. RHS profiles are designed for use as steel construction elements in buildings, in industry, agriculture, drilling equipment and have many other uses.

  • Circular Hollow Sections (CHS) are a type of metal profile with a hollow tubular cross section and excellent resistance to torsion. The wall thickness is uniform around the section, and CHS and RHS (rectangular) are commonly used in welded steel frames where members experience loading in multiple directions.

  • Mechanical tube is produced to meet specific end use requirements, specifications, tolerances and chemistries. ... Mechanical tubing encompasses a wide range of both structural and non-structural applications. Structural Tubing: tubing used for structural applications.

  • DOM tubing is often incorrectly referred to as “seamless tubing” because the seam is almost invisible. DOM is a process that takes the rough cold-formed steel tube and continues to process it further to smooth out the internal surface of the weld seam while improving its mechanical characteristics.

  • Square tubing is commonly used as a railing along staircases. However, it is also used in other, less obvious ways as well. From being used for fencing around yards to structures of buildings, as well as entry gates and entrances, a wide variety of applications are solved by steel square tubing.

  • The pipe schedule refers to the pipe wall thickness. The higher the schedule, the thicker is the pipe wall. For example: 2-inch nominal size steel pipe: schedule 40 has a wall thickness of 0.154 inches and schedule 80 has a wall thickness of 0.218 inches.

  • Tubing is measured using the size of the inside diameter (I.D.) and outside diameter (O.D.). The measurement between the inside and outside diameter of a plastic tube is referred to as “the wall” and is used to measure tube strength: the thicker the wall, the stronger the tube.

  • Tubing is measured by the OUTSIDE DIAMETER (O.D.), specified in inches (e.g., 1.250) or fraction of an inch (eg. 1-1/4″). ... For sizes from 1/8-inch through 12-inch, the NPS corresponds to the nominal inside diameter, but differs somewhat from its actual inside diameter.

  • Square tubes are formed from coils and then ran through a series of dies. They are are welded from the inside to form their shape. Square tubes are generally used for maintenance and structural purposes. ... Square Tube is commonly available in Aluminum, Stainless Steel, Hot Rolled Steel and Cold Rolled Steel.

  • ItemNominal SizeWall Thickness Weight per Ft. Structural Square Tubing-1 1/2x1 1/2-3.35#1 1/2 x 1 1/2 in0.1875 in3.35 lb Structural Square Tubing-1 1/2x1 1/2-3.71#1 1/2 x 1 1/2 in0.2500 in3.71 lb Structural Square Tubing-2x2-4.32#2 x 2 in0.1875 in4.32 lb Structural Square Tubing-2x2-5.41#2 x 2 in0.2500 in5.41 lb Structural Square Tubing-2 1/2x2 1/2-5.59#2 1/2 x 2 1/2 in0.1875 in5.59 lb Structural ...

  • The Steel Tube Institute of North America specifies the measurement of square tubing by its outside width. For example, a tube with 2-inch wide sides calls out as 2 by 2 inches. Sizes range from 1-1/4 by 1-1/4 inch to 32 by 32 inch. From 1-1/4 inches to 2-1/2 inches, the sizing varies by a quarter-inch.

  • When it was invented, galvanized pipe was an alternative to lead pipe for water supply lines. Today, however, we have learned that decades of exposure to water will cause galvanized pipes to corrode and rust on the inside.

  • Steel has become one of the most reliable, most used and most important materials of the age The Nation...

  • Rust is a chemical reaction, essentially an oxidation of metals.The most common rust phenomenon is iron products long time exposure to the air and oxygen oxidation reaction, or by the oxygen element in the water erosion into the oxide.

  • Black pipe is plain steel pipe without any protective coatings. Black pipe is used for a variety of applications around the home. It is very common to see black pipe used for your natural gas line and sprinkler system lines. Since black pipe has no protective coating, it may rust easily in wet or humid environments. To stop the pipe from rusting or corroding on the outside, you should provide a la...

  • Sure you can, our factory can produce according to your requirement, just please send us your CAD or design drawing. ...

  • (1).Advanced manufacturing art, comprehensive inspection systerm and strict process control hasensured the reliability and stability of the product quality. (2). What's more, we've got quite a lot authority certificates, for example, CE, ISO9001, API.(3). Third party inspections are always welcomed. Like BV, SGS etc. ...

  • Generally it is 15-20 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to order quantity. ...

  • We are a leading steel pipe manufacturer and exporter in China.Welcome to our factory at any time. And we will arrange professional sales team to follow up your case. ...